Lamborghini Strike TB

Differential fluid capacity & service interval

Lamborghini Strike TB differential fluid capacity is 8,5 liters. Service intervals include checking every 300 hours and changing every 1200 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Strike 105 TB, Stage 5->ZKDLM60200TL50001 (2022- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 105 TB, Stage 5->ZKDLN40200TL50001 (2022- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 115 TB, Stage 5->ZKDLM70200TL50001 (2022- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 115 TB, Stage 5->ZKDLN50200TL50001 (2022- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 105 TB, Stage 3B->ZKDDS10200TL50001 (2016-2022)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 105 TB, Stage 3B->ZKDDS90200TL50001 (2016-2022)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 115 TB, Stage 3B->ZKDDS20200TL50001 (2016-2022)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Strike 115 TB, Stage 3B->ZKDDT00200TL50001 (2016-2022)
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Lamborghini Strike TB front differential holds 8.5 liters of fluid across all listed configurations, covering the Strike 105 TB and Strike 115 TB in both Stage 3B and Stage 5 variants. In agricultural and heavy equipment contexts, an 8.5-liter differential capacity is consistent with a large-frame tractor front axle housing designed to handle significant torque loads.
  • The check interval for the front differential is set at every 300 hours under normal use conditions. A 300-hour check interval is a routine inspection point that does not require draining or replacing the fluid, serving instead to verify fluid level and condition before the full change interval is reached.
  • The fluid change interval is specified at 1,200 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format, combining an operating-hour threshold with a calendar limit, accounts for machines that accumulate hours slowly, where fluid degradation over time can occur independently of mechanical wear.
  • Stage 3B configurations of the Strike 105 TB are identified by serial number prefixes ZKDDS10200TL50001 and ZKDDS90200TL50001, both covering the 2016-2022 period. The use of serial number breakpoints is standard practice in agricultural equipment specifications to distinguish production runs that may share a model name but differ in mechanical or regulatory configuration.
  • Stage 3B configurations of the Strike 115 TB carry serial number prefixes ZKDDS20200TL50001 and ZKDDT00200TL50001, also spanning 2016-2022, with front differential specifications identical to the Stage 3B Strike 105 TB variants.
  • Stage 5 variants of both the Strike 105 TB and Strike 115 TB, identified by serial number prefixes beginning with ZKDLM and ZKDLN, share the same 8.5-liter capacity and identical check and change intervals as the Stage 3B models. Stage 5 in this context refers to an engine emissions compliance tier rather than a change in drivetrain architecture, which aligns with the unchanged differential specifications.
  • Each model variant within the Strike TB range is listed with two distinct serial number breakpoints per stage designation, suggesting parallel production lines or regional market variants that nonetheless share a unified front differential service specification.

Other Systems