Lamborghini Strike TB

Brake fluid capacity & service interval

Lamborghini Strike TB requires 1 liter of brake fluid. Service intervals occur every 50 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Strike 105 TB, Stage 5->ZKDLM60200TL50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 105 TB, Stage 5->ZKDLN40200TL50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 115 TB, Stage 5->ZKDLM70200TL50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 115 TB, Stage 5->ZKDLN50200TL50001 (2022- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 105 TB, Stage 3B->ZKDDS10200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 105 TB, Stage 3B->ZKDDS90200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 115 TB, Stage 3B->ZKDDS20200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Strike 115 TB, Stage 3B->ZKDDT00200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • The Lamborghini Strike TB hydraulic brake system holds a capacity of 1 liter across all listed configurations, covering both the Strike 105 TB and Strike 115 TB variants. A 1-liter figure for a brake fluid system reflects a typical total reservoir and line volume for a tractor-class hydraulic brake circuit rather than a large-volume overhaul fill.
  • The 50-hour check interval applies uniformly under normal use conditions across all eight configurations. In agricultural and utility equipment, hour-based service intervals are standard because operating time is a more reliable wear indicator than calendar time or distance traveled.
  • Stage 3B configurations carry serial number thresholds beginning at ZKDDS10200TL50001 and ZKDDS90200TL50001 for the 105 TB, and ZKDDS20200TL50001 and ZKDDT00200TL50001 for the 115 TB, all within the 2016-2022 model year span. The serial number threshold format indicates that specifications apply from a specific production unit onward rather than to an entire model year range without distinction.
  • Stage 5 configurations for both the 105 TB and 115 TB carry serial number thresholds beginning in 2022, with the 105 TB identified by prefixes ZKDLM60200TL50001 and ZKDLN40200TL50001, and the 115 TB by ZKDLM70200TL50001 and ZKDLN50200TL50001. Despite the stage designation change from 3B to 5, the brake fluid capacity and check interval remain at 1 liter and 50 hours respectively.
  • Each configuration lists two distinct serial number entry points for the same stage and model year range. The presence of dual serial number thresholds within a single stage and year grouping typically reflects separate production lines, regional variants, or chassis series built in parallel.
  • The 50-hour brake fluid check interval is classified as a check rather than a full fluid replacement, meaning the service action involves inspecting fluid level and condition rather than a mandatory drain and refill at each interval. This distinction is relevant when planning maintenance schedules around total fluid consumption over a machine's service life.

Other Systems