Lamborghini Strike TB

Coolant capacity & service interval

Lamborghini Strike TB uses coolant with a capacity of 15,5 liters. Service intervals include checking every 10 hours and changing every 2400 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Strike 105 TB, Stage 5->ZKDLM60200TL50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 105 TB, Stage 5->ZKDLN40200TL50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 115 TB, Stage 5->ZKDLM70200TL50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 115 TB, Stage 5->ZKDLN50200TL50001 (2022- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 105 TB, Stage 3B->ZKDDS10200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 105 TB, Stage 3B->ZKDDS90200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 115 TB, Stage 3B->ZKDDS20200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Strike 115 TB, Stage 3B->ZKDDT00200TL50001 (2016-2022)
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Lamborghini Strike TB cooling system capacity is 15.5 liters across all listed configurations, covering both the Strike 105 TB and Strike 115 TB variants. A capacity at this level is typical of a full cooling system fill, accounting for the engine block, cylinder head passages, radiator, and associated hoses rather than a partial or drain-and-refill service quantity.
  • The coolant check interval is set at 10 hours of operation under normal use conditions. In agricultural and industrial equipment, hour-based intervals reflect engine runtime rather than calendar time, making short check intervals like 10 hours appropriate for machines that may accumulate operating hours rapidly during seasonal work.
  • The coolant change interval is specified as 2,400 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means a machine with low annual hours would still require a coolant change at the 24-month mark, while a heavily used machine would reach the hour threshold before the calendar limit.
  • Stage 3B configurations of the Strike 105 TB are identified by serial number prefixes ZKDDS10200TL50001 and ZKDDS90200TL50001, both covering the 2016-2022 production period. Despite carrying different serial number series, both share identical cooling system specifications.
  • Stage 3B configurations of the Strike 115 TB follow the same pattern, with serial prefixes ZKDDS20200TL50001 and ZKDDT00200TL50001 also spanning 2016-2022 and carrying the same 15.5-liter capacity and service intervals as the 105 TB Stage 3B variants.
  • Stage 5 variants of both the Strike 105 TB and Strike 115 TB, beginning from 2022, retain the same 15.5-liter cooling system capacity and identical check and change intervals as the earlier Stage 3B configurations. The emission stage upgrade did not alter the cooling system service requirements as listed.
  • Each power variant, the 105 TB and 115 TB, has two distinct serial number lines per emission stage. For Stage 5, the 105 TB uses prefixes ZKDLM60200TL50001 and ZKDLN40200TL50001, while the 115 TB uses ZKDLM70200TL50001 and ZKDLN50200TL50001, suggesting parallel production lines or market-specific builds within the same model and stage designation.

Other Systems