Lamborghini Strike Trend

Automatic transmission fluid capacity & service interval

Lamborghini Strike Trend uses automatic transmission fluid with a capacity of 48 liters. Service intervals include checks every 300 hours and changes every 1200 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Strike 105 Trend, Stage 5->ZKDMR502W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Strike 105 Trend, Stage 5->ZKDMT902W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Strike 75 Trend, Stage 5->ZKDMR302W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Strike 75 Trend, Stage 5->ZKDMT702W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Strike 95 Trend, Stage 5->ZKDMR402W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
Strike 95 Trend, Stage 5->ZKDMT802W0BL50001 (2021- )
  • Use: Normal
  • Capacity 48 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • All six configurations of the Lamborghini Strike Trend covered here share an identical automatic transmission fluid capacity of 48 liters. A capacity at this scale is characteristic of a heavy-duty agricultural or utility machine transaxle rather than a passenger vehicle transmission, reflecting the substantial fluid volume required to lubricate and cool large-format gearboxes under sustained load.
  • The 48-liter figure applies uniformly across the Strike 75 Trend, Strike 95 Trend, and Strike 105 Trend variants, indicating that the transmission or transaxle assembly is common across all three power ratings within the Stage 5 generation beginning from serial number thresholds in 2021.
  • Each configuration carries two distinct serial number entry points, one beginning with ZKDMR and one beginning with ZKDMT, yet both share the same 48-liter capacity and identical service intervals, suggesting the serial number prefixes denote production or market variants rather than mechanical differences in the transmission assembly.
  • The check interval is set at 300 hours under normal use conditions. In agricultural and heavy equipment contexts, hour-based intervals reflect engine operating hours logged on a machine hour meter, making time-in-service a more meaningful measure than calendar distance for equipment that may sit idle for extended periods.
  • The fluid change interval is specified at 1,200 hours or 12 months, whichever comes first under normal use conditions. The dual-trigger structure means a machine with low annual operating hours would still require a fluid change on the calendar schedule, preventing fluid degradation from moisture absorption and oxidation over time regardless of usage intensity.
  • The ratio between the check interval and the change interval is 1 to 4, meaning the fluid level and condition are inspected four times for every full drain-and-fill cycle. This interval structure is standard practice for large-capacity sumps where topping up between changes is expected due to minor seepage or consumption over extended service periods.

Other Systems