JCB Fastrac 2000 Series

Manual transmission fluid capacity & service interval

JCB Fastrac 2000 Series manual transmission fluid capacity is 42 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 2155 (2007-2014)
  • Range and PTO gearbox
  • Use: Normal
  • Capacity 42 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Fastrac 2170 (2007-2014)
  • Range and PTO gearbox
  • Use: Normal
  • Capacity 42 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The JCB Fastrac 2000 Series carries a manual transmission fluid capacity of 42 liters across both the 2155 and 2170 variants for the 2007-2014 model years. A capacity at this scale reflects a combined fill covering the manual transmission, range gearbox, and PTO gearbox within a single shared sump, rather than separate individual fills for each unit.
  • The 42-liter figure applies identically to both the Fastrac 2155 and Fastrac 2170, indicating no variation in transmission fluid capacity between the two models despite their differing engine output designations.
  • A fluid level check interval of 10 hours is specified for both variants under normal use conditions. In heavy equipment applications, a 10-hour check interval corresponds roughly to a daily inspection cycle, aligning with standard end-of-shift or start-of-shift maintenance routines on working farm machinery.
  • The drain and refill interval is set at 1000 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time governs the change even when annual operating hours fall short of the 1000-hour threshold, accounting for fluid degradation that occurs independently of machine use.

Other Systems