JCB Fastrac 3000 Series
Brake fluid capacity & service interval
JCB Fastrac 3000 Series uses brake fluid with a capacity range of 0,75 to 2 liters. Service intervals include a check every 10 hours and a change every 2000 hours or 24 months. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- For JCB Fastrac 3155 with Perkins 1006-6T, serial number 0640000 and later, in 1998-2006 normal use, front hydraulic brake system capacity is 0,75 liter, with a check interval of 10 hours and a change interval of 2000 hours or 24 months.
- For the same 1998-2006 Fastrac 3155 configuration in normal use, rear hydraulic brake system capacity is also 0,75 liter, and service timing matches the front system at 10-hour checks and 2000-hour or 24-month changes.
- Fastrac 3185 with Cummins 6BTA-5.9, serial number 0640000 and later, in 1998-2006 normal use lists 0,75 liter for the front hydraulic brake system. The specification pairs that capacity with checks every 10 hours and changes every 2000 hours or 24 months.
- Rear hydraulic brake capacity on the 1998-2006 Fastrac 3185 normal-use entry is 0,75 liter. The listed maintenance intervals remain 10 hours for checks and 2000 hours or 24 months for fluid changes.
- For JCB Fastrac 3200 Tier IIIa/b in 2009-2012 normal use, both front and rear hydraulic brake system entries show a capacity of 0,75 liter. No interval wording appears alongside either entry, so the note remains limited to the listed capacity value.
- Fastrac 3200 Tier 4 in 2013-2016 raises the front hydraulic brake system capacity to 1 liter in normal use. The same row includes a 10-hour check interval and a 2000-hour or 24-month change interval.
- On the 2013-2016 Fastrac 3200 Tier 4 rear hydraulic brake system entry, capacity is listed as 1-2 liter in normal use. A range value indicates more than one listed fill quantity within that configuration, and the service intervals are 10-hour checks plus 2000-hour or 24-month changes.
- Fastrac 3230 Tier IIIa/b in 2006-2012 normal use shows 0,75 liter for the front hydraulic brake system and 0,75 liter for the rear hydraulic brake system. Both entries are capacity statements only.
- For JCB Fastrac 3230 Tier 4 in 2013-2016 normal use, front hydraulic brake capacity is 1 liter, with inspection every 10 hours and fluid replacement every 2000 hours or 24 months.
- The 2013-2016 Fastrac 3230 Tier 4 rear hydraulic brake system lists 1-2 liter in normal use. The same specification line sets checks at 10 hours and changes at 2000 hours or 24 months.