JCB Fastrac 2000 Series

Brake fluid capacity & service interval

JCB Fastrac 2000 Series brake fluid capacity ranges from 0,75 to 0,8 liters. Service intervals include a 10 hour check and a 2000 hour or 24 month change. The data covers 14 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 2155 (2007-2014)
  • Front
  • Use: Normal
  • Capacity 0,8 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2155 (2007-2014)
  • Rear
  • Use: Normal
  • Capacity 0,8 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2170 (2007-2014)
  • Front
  • Use: Normal
  • Capacity 0,8 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2170 (2007-2014)
  • Rear
  • Use: Normal
  • Capacity 0,8 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2140, Cummins QSB5.9 30 (S/N 0738000 ->) (2004-2006)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2140, Cummins QSB5.9 30 (S/N 0738000 ->) (2004-2006)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2115, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2115, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2125, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2125, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2135, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2135, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2150, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 2150, Perkins 1006-6T (S/N 0738000 ->) (1998-2006)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 2000 Series uses separate hydraulic brake circuits for the front and rear axles, with each circuit carrying its own fluid capacity rather than sharing a single reservoir. Every model in the series follows this split-circuit arrangement.
  • On the Fastrac 2115, 2125, 2135, 2150, and the Cummins-engined 2140, each brake circuit holds 0.75 liter. Because front and rear are independent, the total brake fluid volume across both circuits on these models is 1.5 liters.
  • The Fastrac 2155 and 2170 (2007-2014) carry a slightly larger per-circuit capacity of 0.8 liter, bringing the combined front-and-rear total to 1.6 liters. The 0.05-liter increase per circuit compared to the earlier Perkins-engined models reflects a modest design change in the later generation.
  • All models across the 1998-2014 range share the same change interval: 2000 hours or 24 months, whichever comes first. The dual-trigger format means a machine used lightly enough to avoid 2000 hours within two years still requires a fluid change at the 24-month mark.
  • The check interval for all listed configurations is 10 hours. In agricultural machinery, a 10-hour check interval aligns with roughly a daily inspection cycle during active field seasons, reflecting the safety-critical nature of brake fluid condition monitoring.
  • The Fastrac 2140 pairs the same 0.75-liter per-circuit capacity and identical service intervals as the Perkins 1006-6T models, despite using a Cummins QSB5.9 30 engine. The brake system specifications are therefore independent of the engine choice on that model.
  • All serial numbers referenced across the 1998-2006 models begin at S/N 0738000, indicating the specifications apply from that production point onward within each model's listed year range rather than from the earliest unit ever produced.
  • The 2007-2014 Fastrac 2155 and 2170 entries carry no serial number qualifier, in contrast to the earlier Perkins and Cummins variants. The absence of a serial number boundary on the later models means the specifications apply across the full stated year range without a production-number restriction.

Other Systems