JCB Fastrac 2000 Series
Differential fluid capacity & service interval
JCB Fastrac 2000 Series differential fluid capacity ranges from 7 to 23 liters. Service intervals include checks at 100 or 250 hours and changes at 100 or 1000 hours or 12 months. The data covers 22 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The front differential capacity across all JCB Fastrac 2000 Series models covered in these specifications holds a uniform 7 liters, regardless of model variant, engine fitment, or production year. This consistency across the 2115, 2125, 2135, 2140, 2150, 2155, and 2170 suggests a shared front axle assembly throughout the series.
- Rear differential capacity varies depending on steering configuration. A 2-wheel steer (2WS) rear differential holds 23 liters, while the 4-wheel steer (4WS) variant holds 17 liters. The 6-liter difference reflects the additional mechanical components housed within the 4WS rear axle assembly, which reduce the available fluid volume.
- For the Perkins 1006-6T and Cummins QSB5.9 30 powered models produced from 1998-2006, the routine differential fluid check interval is set at 250 hours under normal use conditions. The change interval is 1000 hours or 12 months, whichever comes first.
- The 2007-2014 Fastrac 2155 and 2170 models carry a notably shorter check interval of 100 hours for both front and rear differentials under normal use, compared to the 250-hour check interval specified for the earlier 1998-2006 models. The change interval of 1000 hours or 12 months remains the same across both generations.
- The Fastrac 2155 and 2170 (2007-2014) introduce a first change only interval of 100 hours for both front and rear differentials. A first-change interval at 100 hours is a break-in service procedure, intended to remove metal particles and contaminants generated during the initial wear-in period of new gear surfaces.
- The Fastrac 2140, fitted with the Cummins QSB5.9 30 engine, covers a narrower production window of 2004-2006 compared to the Perkins 1006-6T variants of the 2115, 2125, 2135, and 2150, which span 1998-2006. Despite the different engine, the differential fluid capacities and service intervals for the 2140 are identical to the other Perkins-powered models in the same serial number range.
- All models in these specifications carrying serial numbers from 0738000 onward share the same differential fluid capacities and service intervals within their respective production periods. The serial number threshold indicates a production cut-off point below which these specifications may not apply.
- The dual-interval structure for the 2007-2014 models, combining a first change only at 100 hours with a subsequent normal change interval at 1000 hours or 12 months, means the total number of fluid changes over a given service life is higher for the 2155 and 2170 than the interval figures alone might suggest when viewed in isolation.