Holder Multipark C
Coolant capacity & service interval
Holder Multipark C uses coolant with a capacity range of 6 to 7.5 liters. Service intervals consist of a 10 hour check and a 12 month change. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| C 220 (1996-2001) |
|
| C 230 (1996-2001) |
|
| C 240 (1996-2001) |
|
| C 330 (1996-2001) |
|
| C 340 (1996-2001) |
|
Additional Notes
- The Holder Multipark C cooling system capacities across the 1996-2001 model range span from 6 liters on the C 220 up to 7.5 liters on the C 240, C 330, and C 340, reflecting differences in engine displacement and cooling circuit size between variants.
- The C 220 carries a base cooling system capacity of 6 liters, which rises to 7 liters when the heater circuit is included, indicating the heater core and associated plumbing add a full liter of fluid volume to the total fill.
- The C 230 shows a base capacity of 6.5 liters and a heater-equipped capacity of 7.5 liters, meaning the heater circuit on the C 230 also contributes an additional liter, consistent with the C 220 pattern.
- The C 240, C 330, and C 340 each share an identical 7.5-liter capacity without a separate heater-equipped figure listed, distinguishing them from the C 220 and C 230 where the heater variant is specified separately.
- A coolant level check interval of 10 operating hours applies uniformly across all five variants under normal use conditions, reflecting the time-based nature of maintenance on compact utility machines where annual mileage is not a relevant measure.
- A coolant change interval of 12 months is specified for all five variants under normal use conditions, meaning the fluid is renewed on an annual calendar basis regardless of accumulated operating hours.