Holder Multipark C

Brake fluid capacity & service interval

Holder Multipark C requires 0,4 liter of brake fluid. Service intervals include checks every 150 hours and fluid changes every 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C 220 (1996-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 230 (1996-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 240 (1996-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 330 (1996-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months
C 340 (1996-2001)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 150 hours
  • Change 12 months

Additional Notes

  • The Holder Multipark C hydraulic brake system holds 0,4 liter of brake fluid across all five variants covered in the 1996-2001 model range, including the C 220, C 230, C 240, C 330, and C 340.
  • A 0,4 liter capacity is a relatively modest figure, consistent with the compact hydraulic circuits found in small utility and municipal vehicles rather than larger commercial machinery.
  • The check interval for the hydraulic brake system is set at 150 hours across all listed variants, reflecting an hour-based maintenance schedule typical of equipment that accumulates operating time rather than road mileage.
  • The change interval is defined as 12 months for all five variants under normal use conditions, meaning brake fluid renewal is tied to calendar time regardless of how many operating hours have been logged within that period.
  • The combination of a 150-hour check interval and a 12-month change interval means fluid condition is monitored on two independent schedules simultaneously, with whichever threshold is reached first serving as the applicable service trigger.
  • Brake fluid is hygroscopic by nature, meaning it absorbs moisture from the atmosphere over time, which is the underlying reason a time-based annual change interval is applied even when hour-based usage may be low.
  • The specifications are identical across the C 220, C 230, C 240, C 330, and C 340 for the 1996-2001 period, indicating no variation in brake fluid capacity or service intervals between the different engine or configuration designations within the Multipark C range.

Other Systems