Holder Multipark C

Automatic transmission fluid capacity & service interval

Holder Multipark C requires automatic transmission fluid with a capacity of 16,5 liters. Service intervals include checking at 150 hours and changing at 1000 hours or 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C 220 (1996-2001)
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 16,5 liter
  • Check 150 hours
  • Change 1000 hours/ 12 months
  • Code: 2/2
  • C 230 (1996-2001)
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 16,5 liter
  • Check 150 hours
  • Change 1000 hours/ 12 months
  • Code: 2/2
  • C 240 (1996-2001)
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 16,5 liter
  • Check 150 hours
  • Change 1000 hours/ 12 months
  • Code: 2/2
  • C 330 (1996-2001)
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 16,5 liter
  • Check 150 hours
  • Change 1000 hours/ 12 months
  • Code: 2/2
  • C 340 (1996-2001)
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 16,5 liter
  • Check 150 hours
  • Change 1000 hours/ 12 months
  • Code: 2/2

Additional Notes

  • The Holder Multipark C series covers five variants — C 220, C 230, C 240, C 330, and C 340 — all produced across the 1996-2001 model years.
  • Each variant carries a fluid capacity of 16.5 liters for the combined transmission, hydrostatic, and hydraulic system, meaning a single shared reservoir serves all three functions simultaneously.
  • A capacity of 16.5 liters is a notably large volume for this type of integrated system, reflecting the demands of a hydrostatic drive circuit that requires sufficient fluid volume to maintain stable pressure across variable load conditions.
  • The check interval is set at every 150 operating hours under normal use conditions, which in hour-metered equipment corresponds to a relatively frequent monitoring schedule compared to the full change interval.
  • The fluid change interval is specified at 1,000 operating hours or 12 months under normal use conditions, whichever comes first, combining both a usage-based and a calendar-based threshold.
  • The dual-trigger change interval of 1,000 hours or 12 months means that a machine with low annual operating hours would still require a fluid change on the calendar schedule before reaching the hour-based threshold.
  • All five variants — C 220, C 230, C 240, C 330, and C 340 — share identical capacity and interval specifications across the full 1996-2001 production span, with no variation recorded between the lower-numbered and higher-numbered models.

Other Systems