Holder C

Clutch fluid capacity & service interval

Holder C uses clutch fluid with a capacity range of 0,25 to 0,3 liters. Service intervals include a check at 150 hours and a change at 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C 65 Turbo (1986-1990)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 24 months
C 50 Turbo (1983-1990)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 150 hours
  • Change 24 months
C 500 (1982-1990)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 150 hours
  • Change 24 months

Additional Notes

  • The Holder C 500 carries a clutch fluid capacity of 0,3 liter, which is the largest reservoir volume among the three configurations listed for the hydraulic clutch system.
  • Both the C 50 Turbo and the C 65 Turbo share an identical clutch fluid capacity of 0,25 liter, despite belonging to different model year ranges within the 1982-1990 span.
  • All three configurations specify a check interval of 150 hours, a figure tied to operating hours rather than calendar time, which is typical for machinery used in field or industrial conditions.
  • The change interval across all three configurations is set at 24 months under normal use conditions, meaning a time-based replacement cycle governs fluid renewal regardless of accumulated operating hours.
  • The C 65 Turbo, introduced from 1986, carries the same 0,25 liter capacity and identical service intervals as the earlier C 50 Turbo, indicating no revision to clutch fluid specifications between those two turbocharged variants.
  • Each configuration is noted as having a hydraulic clutch system, which explains why a discrete fluid capacity and a dedicated check interval are specified rather than a shared or integrated fluid circuit.

Other Systems