Fendt P series

Transfer case fluid capacity & service interval

Fendt P series transfer case fluid capacity is 1,5 liters. Service intervals include checking every 100 hours and changing every 500 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8370 P (2009-2013)
  • Use: Normal
  • Capacity 1,5 liter
  • Check 100 hours
  • Change 500 hours
8370 P AL (2009-2013)
  • Use: Normal
  • Capacity 1,5 liter
  • Check 100 hours
  • Change 500 hours
8400 P (2009-2013)
  • Use: Normal
  • Capacity 1,5 liter
  • Check 100 hours
  • Change 500 hours
8400 P AL (2009-2013)
  • Use: Normal
  • Capacity 1,5 liter
  • Check 100 hours
  • Change 500 hours

Additional Notes

  • The Fendt P series transfer case fluid capacity is 1.5 liters across all four configurations covered — the 8370 P, 8370 P AL, 8400 P, and 8400 P AL — for model years 2009-2013.
  • A 1.5-liter capacity is a relatively modest volume, consistent with a transfer box rather than a primary transmission or axle housing, where fluid volumes tend to be considerably higher.
  • The transfer box fluid level on all four configurations is subject to a check interval of every 100 hours of operation under normal use conditions.
  • The fluid change interval for all four configurations is set at 500 hours under normal use conditions, meaning a full drain and refill of the 1.5-liter transfer box is performed once for every five scheduled level checks.
  • The AL variants — the 8370 P AL and 8400 P AL — share identical transfer box capacity and service intervals with their non-AL counterparts, indicating no difference in transfer box specification between standard and AL configurations within the same model year range.
  • The 8370 P and 8400 P differ in model designation, yet both carry the same 1.5-liter transfer box capacity and the same 100-hour check and 500-hour change intervals across the 2009-2013 period.

Other Systems