Fendt L series

Additional Notes

• All seven configurations in the Fendt L series carry an identical manual transaxle fluid capacity of 12 liters, applying uniformly across both the 5250 and 6270 model families as well as their successors.
• The 12-liter figure represents a service fill capacity for the transaxle unit, meaning fluid added during a standard drain-and-refill procedure rather than a full overhaul or bench-rebuild quantity, which would typically differ.
• All capacity values are specified under normal use conditions, indicating the figures apply to standard operating environments rather than severe-duty or extended-service scenarios.
• The 5250 L and 5250 L-AL variants share the same 12-liter transaxle capacity across their 2008-2011 production span, with the AL designation representing an alternative configuration that does not alter the fluid volume requirement.
• The 5255 L and 5255 L PL, introduced from 2014, retain the same 12-liter transaxle capacity as the earlier 5250 L models, indicating continuity in the transaxle design between those generations.
• The PL trim designation appears in both the 5255 and 6275 families from 2014, and in both cases the transaxle fluid capacity remains at 12 liters, consistent with the non-PL variants of the same models.
• The 6270 L covered the 2008-2011 period, while the 6275 L and 6275 L PL represent the 2014 generation of the larger-displacement family, all sharing the same 12-liter transaxle specification despite the model number change.