Fendt P series

Brake fluid capacity & service interval

Fendt P series brake fluid capacity is 0,5 liter. Service intervals require a check every 10 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
8370 P (2009-2013)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours
8370 P AL (2009-2013)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours
8400 P (2009-2013)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours
8400 P AL (2009-2013)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours

Additional Notes

  • The Fendt P series hydraulic brake system holds 0.5 liter of brake fluid across all four configurations covered in the 2009-2013 model range.
  • A 0.5 liter capacity is characteristic of a reservoir-level service fill rather than a full system overhaul, reflecting the relatively small volume needed to maintain proper fluid level in a hydraulic brake circuit.
  • The standard and AL variants of both the 8370 P and 8400 P share an identical 0.5 liter capacity, indicating no difference in brake fluid reservoir size between those two trim designations.
  • The check interval for the hydraulic brake system is set at every 10 hours of operation under normal use conditions across all four configurations.
  • A 10-hour check interval is notably short by general service standards, which is consistent with the demanding duty cycles typical of agricultural machinery where brake system integrity is monitored frequently.
  • The 10-hour interval applies specifically under normal use conditions, as recorded in the specifications for each of the four configurations.

Other Systems