Fendt P series

Coolant capacity & service interval

Fendt P series uses coolant with a capacity of 60 liters. Service intervals require a check every 10 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
8370 P (2009-2013)	Use: Normal Capacity 60 liter Check 10 hours
8370 P AL (2009-2013)	Use: Normal Capacity 60 liter Check 10 hours
8400 P (2009-2013)	Use: Normal Capacity 60 liter Check 10 hours
8400 P AL (2009-2013)	Use: Normal Capacity 60 liter Check 10 hours

The Fendt P series cooling system capacity is 60 liters across the 8370 P, 8370 P AL, 8400 P, and 8400 P AL configurations for the 2009-2013 model years, indicating a large-volume system consistent with high-output agricultural machinery engines.
A 60-liter coolant capacity places the P series well above typical passenger vehicle cooling systems, which generally range from 6 to 12 liters, reflecting the thermal demands of heavy-duty tractor powerplants.
The AL variants of both the 8370 P and 8400 P share the same 60-liter cooling system capacity as their standard counterparts, meaning the AL designation does not introduce any difference in coolant volume requirements.
The 8370 P and 8400 P share an identical cooling system capacity of 60 liters, indicating no variation in coolant volume between the two engine configurations within the 2009-2013 production span.
A coolant check interval of 10 hours applies to all four configurations under normal use conditions. A 10-hour interval is notably short and corresponds to the kind of frequent monitoring expected during initial break-in periods or intensive field operation cycles common in agricultural equipment.