Fendt L series

Brake fluid capacity & service interval

Fendt L series brake fluid capacity is 0,3 liter. Service intervals include normal use. Data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5255 L (2014- )
  • Use: Normal
  • Capacity 0,3 liter
5255 L PL (2014- )
  • Use: Normal
  • Capacity 0,3 liter
6275 L (2014- )
  • Use: Normal
  • Capacity 0,3 liter
6275 L PL (2014- )
  • Use: Normal
  • Capacity 0,3 liter
5250 L (2008-2011)
  • Use: Normal
  • Capacity 0,3 liter
5250 L-AL (2008-2011)
  • Use: Normal
  • Capacity 0,3 liter
6270 L (2008-2011)
  • Use: Normal
  • Capacity 0,3 liter

Additional Notes

  • The Fendt L series hydraulic brake system holds 0.3 liter of brake fluid across all listed configurations, from the 5250 L through to the 6275 L PL. This small reservoir volume is consistent with a compact hydraulic brake circuit rather than a large integrated hydraulic system shared with other tractor functions.
  • The 0.3 liter figure represents the fluid capacity of the hydraulic brake system alone. In agricultural machinery, brake hydraulics are often a closed, dedicated circuit, which accounts for the relatively low volume compared to the main hydraulic system capacity.
  • All seven configurations carry the same 0.3 liter capacity under normal use conditions. In fluid service specifications, a normal use designation typically reflects standard operating environments without the added thermal or mechanical stress that would define a severe use classification.
  • The 5250 L and 5250 L-AL variants share identical brake fluid capacity specifications for the 2008-2011 production period. The AL designation on the 5250 L-AL indicates a trim or equipment variant, yet the hydraulic brake system volume remains unchanged at 0.3 liter.
  • The 6270 L covered the 2008-2011 period, while the 6275 L and 6275 L PL entered production from 2014. Despite the model designation change between these generations, the hydraulic brake system capacity of 0.3 liter remained consistent across both the earlier and later variants in the 6000-series lineup.
  • The PL variants, the 5255 L PL and 6275 L PL, both introduced from 2014, retain the 0.3 liter brake fluid capacity. PL typically denotes a specific equipment or specification package, and in both cases the hydraulic brake system volume is unaffected by that distinction.

Other Systems