Fendt 700 Vario COM1/2

Differential fluid capacity & service interval

Fendt 700 Vario COM1/2 differential fluid capacity ranges from 6 to 8.3 liters. Service intervals include checks every 12 months or 500 hours, and changes at 50 hours or 1000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 711 Vario (2003-2006)
  • Front, limited slip
  • Use: Normal
  • Capacity 6-8 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • 711 Vario (2003-2006)
  • Front, limited slip
  • Use: Initial service
  • Capacity 6-8 liter
  • Change 50 hours
  • 712 Vario (2003-2006)
  • Front, limited slip
  • Use: Normal
  • Capacity 6-8 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • 712 Vario (2003-2006)
  • Front, limited slip
  • Use: Initial service
  • Capacity 6-8 liter
  • Change 50 hours
  • 714 Vario (2003-2006)
  • Front, limited slip
  • Use: Normal
  • Capacity 6-8,3 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • 714 Vario (2003-2006)
  • Front, limited slip
  • Use: Initial service
  • Capacity 6-8,3 liter
  • Change 50 hours
  • 716 Vario (2003-2006)
  • Front, limited slip
  • Use: Normal
  • Capacity 6-8,3 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • 716 Vario (2003-2006)
  • Front, limited slip
  • Use: Initial service
  • Capacity 6-8,3 liter
  • Change 50 hours

Additional Notes

  • The Fendt 700 Vario COM1/2 front limited slip differential fluid capacity falls into two groups across the 2003-2006 model range. The 711 Vario and 712 Vario share a capacity of 6 to 8 liters, while the 714 Vario and 716 Vario carry a slightly wider range of 6 to 8.3 liters.
  • The capacity figures listed as ranges rather than fixed values reflect the difference between a drain-and-refill service fill and a complete overhaul fill, where a full teardown allows more fluid to be added than a standard fluid change.
  • Under normal use conditions, all four variants share an identical check interval of every 12 months or 500 hours, whichever comes first. A check interval at this frequency is standard practice for monitoring fluid condition and level without committing to a full fluid change.
  • The normal-use change interval across all four variants is set at 1,000 hours or 24 months. Pairing an hour-based and a calendar-based threshold means the interval is governed by whichever limit is reached first, accounting for both high-use and low-use operating patterns.
  • An initial service interval of 50 hours applies to all four variants. A break-in change at 50 hours is intended to remove metal particles and contaminants that accumulate as new components seat during early operation, before the standard long-term interval takes over.
  • The initial service rows carry only a change interval and no check interval, meaning no intermediate inspection is specified before the 50-hour fluid change on any of the four variants.
  • The 711 Vario and 712 Vario share identical capacity values and identical service intervals across both normal and initial service conditions, indicating no differentiation in differential fluid servicing between those two variants despite their different model designations.
  • The same pattern holds for the 714 Vario and 716 Vario, which also share identical capacity ranges and service intervals with each other, with the only distinction from the 711 and 712 being the slightly higher upper capacity limit of 8.3 liters versus 8 liters.

Other Systems