Fendt 700 Vario COM1/2

Brake fluid capacity & service interval

Fendt 700 Vario COM1/2 uses brake fluid with a capacity range of 0,5 to 0,8 liters. Service intervals include checks at 50 hours or 12 months/500 hours and fluid changes at 2000 hours/24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
711 Vario (2003-2006)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 711 Vario (2003-2006)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
712 Vario (2003-2006)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 712 Vario (2003-2006)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
714 Vario (2003-2006)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 714 Vario (2003-2006)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
716 Vario (2003-2006)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 716 Vario (2003-2006)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours

Additional Notes

  • The Fendt 700 Vario COM1/2 series covers four model variants across the 2003-2006 production range: the 711, 712, 714, and 716 Vario.
  • Each model variant is specified with two distinct brake system configurations — a hydraulic brake/clutch system and a pneumatic brake system — each carrying its own capacity and service interval figures.
  • The hydraulic brake/clutch system holds a capacity of 0.8 liter across all four variants, while the pneumatic brake system holds 0.5 liter, reflecting a 37.5% difference in fluid volume between the two system types on the same machine.
  • The 0.8-liter figure for the hydraulic brake/clutch system represents a service fill capacity, meaning the volume of fluid the system holds under normal operating conditions rather than a full overhaul or dry-fill quantity.
  • For the hydraulic brake/clutch system, a fluid check is specified at 12 months or 500 hours under normal use conditions, with whichever threshold arrives first serving as the trigger point.
  • A fluid change interval of 2000 hours or 24 months is assigned to the hydraulic brake/clutch system across all four variants, again under normal use conditions, pairing a time-based and an hours-based limit together.
  • The pneumatic brake system carries only a check interval of 50 hours under normal use conditions, with no fluid change interval listed in the specifications for any of the four variants.
  • The 50-hour check interval on the pneumatic brake system is notably more frequent than the 500-hour check interval on the hydraulic brake/clutch system, indicating a tighter monitoring schedule relative to operating hours.
  • All eight specification rows across the 711, 712, 714, and 716 Vario are assigned a normal use condition, meaning no separate severe-duty intervals are defined within the available data.
  • The capacity and interval figures are identical across all four model variants for both system types, indicating no variation in brake fluid specifications within the 700 Vario COM1/2 range for the 2003-2006 period.

Other Systems