Fendt 600 gen1

Additional Notes

• The front differential capacity across all four Fendt 600 Gen1 Vario variants — the 614, 616, 618, and 620 — is listed as a range of 6.3 to 8.2 liters rather than a fixed value. A range like this typically reflects variation depending on the fill angle of the axle or the specific front axle configuration installed, meaning the actual service fill amount depends on reaching the correct level rather than pouring a predetermined volume.
• The rear differential on all four variants carries a standard capacity of 9 liters when no tire pressure control system is present. A 9-liter rear differential fill is a substantial volume, consistent with the heavy-duty axle housings found on tractors in this power class.
• When a tire pressure control system is fitted, the rear differential capacity changes to 8.5 liters per unit, with two separate units noted — meaning the total fluid volume across both rear differential housings in that configuration reaches 17 liters. The reduction per unit from 9 to 8.5 liters likely reflects internal space occupied by the tire pressure control hardware integrated into the axle.
• The front differential capacity range of 6.3 to 8.2 liters is identical across the 614 Vario, 616 Vario, 618 Vario, and 620 Vario, indicating no front axle differentiation between the four model variants within the 600 Gen1 lineup for the 2023 model year.
• Similarly, the rear differential specifications — both the standard 9-liter figure and the 8.5-liter-per-unit figure with tire pressure control — are uniform across all four variants, pointing to a shared rear axle assembly regardless of the power output differences between the 614, 616, 618, and 620 designations.
• All differential fluid entries across the 600 Gen1 lineup are classified under normal use conditions, meaning no separate severe-duty interval or capacity adjustment is specified for demanding operating environments.