Deutz-Fahr Series 5 TTV
Coolant capacity & service interval
Deutz-Fahr Series 5 TTV coolant capacity is 11 liters. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 5100 TTV (2013- ) |
|
| 5110 TTV (2013- ) |
|
| 5120 TTV (2013- ) |
|
| 5130 TTV (2013- ) |
|
Additional Notes
- The Deutz-Fahr Series 5 TTV cooling system capacity is 11 liters across the 5100 TTV, 5110 TTV, 5120 TTV, and 5130 TTV variants, reflecting a service fill volume consistent with a mid-range agricultural tractor cooling circuit.
- A coolant check interval of every 10 hours applies to all four variants under normal use conditions, indicating a high-frequency inspection requirement relative to the change interval.
- The coolant change interval is set at 2000 hours or 24 months, whichever comes first, under normal use conditions, meaning both an operational hour threshold and a calendar-based limit govern the replacement schedule simultaneously.
- The 11-liter capacity figure is uniform across all four models starting from 2013, with no variation tied to engine output differences between the 5100 TTV, 5110 TTV, 5120 TTV, and 5130 TTV designations.
- The 2000-hour change interval is notably long for a coolant service cycle, which is typical of modern extended-life coolant formulations used in agricultural equipment designed for seasonal or year-round field operation.
- The 24-month calendar limit on the coolant change interval means that even in low-hour applications where 2000 hours have not been reached, a two-year maximum service life applies to the coolant fill.