Deutz-Fahr Series 5G TB

Coolant capacity & service interval

Deutz-Fahr Series 5G TB requires coolant with a capacity of 15,5 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5080 G TB, Stage 3B->ZKDDL00200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5080 G TB, Stage 3B->ZKDDL30200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5105 G TB, Stage 3B->ZKDDS50200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5105 G TB, Stage 3B->ZKDDT30200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5115 G TB, Stage 3B->ZKDDS60200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
5115 G TB, Stage 3B->ZKDDT40200TD50001 (2017- )
  • Use: Normal
  • Capacity 15,5 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • All six configurations of the Deutz-Fahr Series 5G TB covered here share an identical cooling system capacity of 15.5 liters, indicating a uniform cooling circuit design across the 5080, 5105, and 5115 power variants within the Stage 3B emission tier.
  • Stage 3B refers to a European non-road mobile machinery emissions standard, and serial number prefixes such as ZKDDL, ZKDDS, and ZKDDT serve as build-line identifiers that distinguish individual production sequences within the same model designation.
  • The 10-hour coolant level check interval is notably short relative to the change interval, reflecting the importance of early detection of leaks or low fluid levels during initial operation and routine daily or weekly use in agricultural field conditions.
  • The coolant change interval is set at 2400 hours or 24 months under normal use conditions, whichever comes first. The dual threshold means a machine used lightly enough to reach 24 months before accumulating 2400 hours would still require a coolant change at that calendar point.
  • Each of the three model designations — 5080, 5105, and 5115 — appears in two separate serial number variants, yet both variants within each model share identical capacity and interval figures, suggesting the serial number split reflects production line or regional differences rather than mechanical variation in the cooling system.

Other Systems