Deutz-Fahr Series 5 TB
Coolant capacity & service interval
Deutz-Fahr Series 5 TB coolant capacity is 15,5 liters. Service intervals include a 10 hour check and a 2400 hour or 24 month change. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 5105 TB, Stage 5->ZKDLN00200TD50001 (2023- ) |
|
| 5105 TB, Stage 5->ZKDLN80200TD50001 (2023- ) |
|
| 5115 TB, Stage 5->ZKDLN10200TD50001 (2023- ) |
|
| 5115 TB, Stage 5->ZKDLN90200TD50001 (2023- ) |
|
Additional Notes
- The Deutz-Fahr Series 5 TB cooling system capacity is 15.5 liters across all four listed configurations, covering the 5105 TB and 5115 TB variants under Stage 5 emissions compliance starting from serial number breakpoints in 2023.
- A 15.5-liter cooling system capacity is consistent with a mid-range agricultural tractor engine, reflecting the total volume of coolant held across the radiator, engine block, and associated passages rather than a partial service top-up quantity.
- The coolant check interval is set at 10 hours of operation under normal use conditions, which places it among the most frequent inspection tasks in a standard service schedule.
- The coolant change interval is specified at 2400 hours or 24 months under normal use conditions, whichever comes first, meaning calendar time can trigger a change independently of machine hours accumulated.
- A 2400-hour change interval is relatively extended for agricultural equipment coolant, reflecting the use of a long-life coolant formulation rather than a conventional shorter-cycle fluid.
- Both the 5105 TB and 5115 TB share identical cooling system capacity and service intervals across their respective serial number variants, indicating no differentiation in cooling system specification between the two power levels within the Stage 5 configuration.