Deutz-Fahr Series 3

Differential fluid capacity & service interval

Deutz-Fahr Series 3 differential fluid capacity is 4,8 liters. Service intervals include checks at 300 hours and changes at 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 3050, -> ZKDFU60200MD50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • 3050, -> ZKDHC30200MD50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • 3060, -> ZKDHC70200MD50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • 3060, -> ZKDFU70200MD50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 4,8 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Deutz-Fahr Series 3 front differential holds 4.8 liters across all four listed configurations, covering the 3050 and 3060 models from serial numbers starting at ZKDFU60200MD50001, ZKDHC30200MD50001, ZKDFU70200MD50001, and ZKDHC70200MD50001.
  • A 4.8-liter capacity for a front differential is a moderately sized fill, consistent with compact-to-mid-range agricultural tractor axle housings rather than larger multi-plate wet differential assemblies found in heavier machinery.
  • The fluid check interval is set at 300 hours under normal use conditions, meaning a level inspection is due well before any drain-and-fill service is required.
  • The change interval under normal use conditions is 1,200 hours or 12 months, whichever comes first, applying equally to both the 3050 and 3060 configurations listed.
  • The dual-trigger change interval of 1,200 hours or 12 months means calendar time can mandate a fluid change even when operational hours have not yet accumulated to the hour-based threshold.
  • All four rows share identical capacity and interval specifications, indicating no differentiation in front differential service requirements between the 3050 and 3060 within the serial number ranges listed.

Other Systems