Deutz-Fahr Series 3

Brake fluid capacity & service interval

Deutz-Fahr Series 3 brake fluid capacity is 1 liter. Service intervals require a check every 50 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
3050, -> ZKDFU60200MD50001 (2021- )	Use: Normal Capacity 1 liter Check 50 hours
3050, -> ZKDHC30200MD50001 (2021- )	Use: Normal Capacity 1 liter Check 50 hours
3060, -> ZKDHC70200MD50001 (2021- )	Use: Normal Capacity 1 liter Check 50 hours
3060, -> ZKDFU70200MD50001 (2021- )	Use: Normal Capacity 1 liter Check 50 hours

The Deutz-Fahr Series 3 hydraulic brake system holds a capacity of 1 liter across all four listed configurations, which is a typical reservoir volume for a compact tractor brake circuit rather than a full system overhaul fill.
All four configurations share an identical 50-hour check interval, meaning brake fluid level and condition are inspected at every 50 hours of operation under normal use conditions.
A 50-hour brake fluid check interval is relatively frequent compared to many agricultural machinery service schedules, reflecting the safety-critical nature of hydraulic brake circuits in field operation.
The 3050 variants are represented by two distinct serial number breakpoints, ZKDFU60200MD50001 and ZKDHC30200MD50001, both starting from 2021, yet both carry the same 1-liter capacity and 50-hour check specification.
The 3060 variants similarly split across two serial number designations, ZKDFU70200MD50001 and ZKDHC70200MD50001, with no deviation in brake fluid capacity or inspection interval relative to the 3050 configurations.
The serial number prefixes ZKDFU and ZKDHC across both the 3050 and 3060 models suggest different production variants or assembly lines, yet the brake system specifications remain uniform at 1 liter and a 50-hour check cadence.