Deutz-Fahr Series 3

Coolant capacity & service interval

Deutz-Fahr Series 3 coolant capacity is 9 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
3050, -> ZKDFU60200MD50001 (2021- )
  • Use: Normal
  • Capacity 9 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
3050, -> ZKDHC30200MD50001 (2021- )
  • Use: Normal
  • Capacity 9 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
3060, -> ZKDHC70200MD50001 (2021- )
  • Use: Normal
  • Capacity 9 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
3060, -> ZKDFU70200MD50001 (2021- )
  • Use: Normal
  • Capacity 9 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • All four configurations in the Deutz-Fahr Series 3 covered here share an identical cooling system capacity of 9 liters, indicating a uniform cooling circuit volume across the 3050 and 3060 model variants represented.
  • The 10-hour check interval for coolant is notably short in absolute terms, reflecting the kind of frequent visual or level inspection typical during early machine operation or routine daily servicing cycles on agricultural equipment.
  • A change interval of 1200 hours or 24 months, whichever comes first, applies uniformly across all four configurations under normal use conditions, meaning both a time-based and an hours-based threshold govern when coolant replacement is due.
  • The dual-trigger change interval of 1200 hours and 24 months means that a machine accumulating low annual hours could still require a coolant change on calendar grounds before reaching the hours threshold.
  • The 3050 appears under two distinct serial number prefixes, ZKDFU60200MD50001 and ZKDHC30200MD50001, both starting from 2021, yet both carry the same 9-liter capacity and identical service intervals, pointing to no specification difference between those two production variants for the cooling system.
  • Similarly, the 3060 is represented under prefixes ZKDFU70200MD50001 and ZKDHC70200MD50001, also from 2021, with cooling system specs that are identical to each other and to the 3050 entries, meaning no capacity or interval distinction exists between the 3050 and 3060 for coolant servicing.

Other Systems