Deutz-Fahr C 9300

Coolant capacity & service interval

Deutz-Fahr C 9300 coolant capacity is 17,2 liters. Service intervals are 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
C9305 TS, Stage IV (2018- )	Use: Normal Capacity 17,2 liter Change 1000 hours/ 12 months
C9305 TSB, Stage IV (2018- )	Use: Normal Capacity 17,2 liter Change 1000 hours/ 12 months
C9306 TS, Stage IV (2018- )	Use: Normal Capacity 17,2 liter Change 1000 hours/ 12 months
C9306 TSB, Stage IV (2018- )	Use: Normal Capacity 17,2 liter Change 1000 hours/ 12 months

The Deutz-Fahr C 9300 cooling system capacity is listed at 17.2 liters across the C9305 TS, C9305 TSB, C9306 TS, and C9306 TSB variants, all running Stage IV engines introduced from 2018.
A 17.2-liter cooling system capacity is consistent with large-displacement agricultural machinery engines, where substantial coolant volume is needed to manage heat across extended operational cycles.
The change interval for all four Stage IV variants is set at 1,000 hours or 12 months, whichever comes first, under normal use conditions.
The dual-trigger interval structure, combining an hour-based threshold with a calendar-based one, reflects standard practice for equipment that may accumulate operating hours at varying rates across different seasons or workloads.
No capacity or interval differences exist between the TS and TSB sub-variants within either the C9305 or C9306 configurations, indicating a shared cooling system architecture across those pairings.
The C9305 and C9306 variants also share identical 17.2-liter capacity and 1,000-hour/12-month interval figures, meaning engine designation differences between the two do not translate into any variation in cooling system service specifications.