Deutz-Fahr C 9000

Brake fluid capacity & service interval

Deutz-Fahr C 9000 uses brake fluid with a capacity of 0,3 liter. Service intervals include a check every 50 hours and a change every 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C9205 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9205 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9206 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9206 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9205 TS, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
  • Change 24 months
C9205 TSB, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
  • Change 24 months
C9206 TS, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
  • Change 24 months
C9206 TSB, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
  • Change 24 months

Additional Notes

  • The hydraulic brake system across all Deutz-Fahr C 9000 configurations listed holds a uniform capacity of 0.3 liter, a small reservoir volume consistent with a closed hydraulic brake circuit rather than a large integrated hydraulic system.
  • A 50-hour check interval applies to every configuration listed, covering both the Stage IIIB and IV Tier 4i variants introduced from 2014 and the Stage IV variants introduced from 2016.
  • Stage IIIB and IV Tier 4i configurations, spanning the C9205 TS, C9205 TSB, C9206 TS, and C9206 TSB, each carry a 24-month fluid change interval alongside the 50-hour check requirement.
  • The Stage IV configurations of the same four variants, introduced from 2016, list only the 50-hour check interval with no corresponding 24-month change interval in the specifications.
  • The TS and TSB designations represent distinct variants within the C9205 and C9206 lines, yet both share identical brake fluid capacity and service interval figures within their respective emission stage groupings.
  • The 24-month change interval on the Stage IIIB and IV Tier 4i configurations is a time-based rather than usage-based requirement, meaning elapsed calendar time governs the change regardless of machine operating hours.
  • The 0.3-liter capacity figure applies uniformly across the C9205 and C9206 model lines, indicating no difference in brake reservoir size between those two model designations.

Other Systems