Deutz-Fahr C 9300

Brake fluid capacity & service interval

Deutz-Fahr C 9300 uses brake fluid with a capacity of 0,3 liter. The service interval requires a check every 50 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C9305 TS, Stage IV (2018- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9305 TSB, Stage IV (2018- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9306 TS, Stage IV (2018- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours
C9306 TSB, Stage IV (2018- )
  • Use: Normal
  • Capacity 0,3 liter
  • Check 50 hours

Additional Notes

  • The Deutz-Fahr C 9300 brake fluid specifications cover four configurations: the C9305 TS, C9305 TSB, C9306 TS, and C9306 TSB, all Stage IV variants with a 2018 starting year.
  • Each of the four configurations carries a hydraulic brake system capacity of 0.3 liter, which is a relatively small reservoir volume consistent with a dedicated brake fluid circuit rather than a shared hydraulic system.
  • The 0.3 liter figure represents a service fill capacity, meaning the amount of fluid the hydraulic brake system holds under normal operating conditions rather than a full overhaul or flush volume.
  • A check interval of 50 hours applies uniformly across all four configurations under normal use conditions, meaning fluid level inspection is tied to machine operating hours rather than a calendar-based schedule.
  • The 50-hour check interval is notably frequent relative to many agricultural machine service schedules, reflecting the safety-critical nature of brake system integrity in harvesting equipment.
  • The TSB variants of both the C9305 and C9306 share identical brake fluid capacity and check interval values with their TS counterparts, indicating no differentiation in brake system specification between those sub-variants.

Other Systems