Deutz-Fahr C 9000

Coolant capacity & service interval

Deutz-Fahr C 9000 coolant capacity ranges from 17,2 to 55 liters. Service intervals include 24 months or 1000 hours/ 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C9205 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C9205 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C9206 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C9206 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C9205 TS, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
C9205 TSB, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
C9206 TS, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months
C9206 TSB, Stage IIIB & IV Tier 4i (2014- )
  • Use: Normal
  • Capacity 55 liter
  • Change 24 months

Additional Notes

  • Across all Deutz-Fahr C 9000 configurations listed, coolant capacity splits into two distinct values depending on emission standard: Stage IIIB and IV Tier 4i variants hold 55 liters, while Stage IV variants hold 17.2 liters. A difference of this magnitude between otherwise closely related configurations typically reflects a significant change in engine architecture or cooling circuit design rather than a minor revision.
  • The 55-liter capacity associated with Stage IIIB and IV Tier 4i configurations applies to both TS and TSB body variants across the C9205 and C9206 model lines, indicating a consistent cooling system volume across those particular emission-standard variants regardless of model number or body designation.
  • Stage IV configurations, covering both TS and TSB variants of the C9205 and C9206, share the 17.2-liter capacity. This lower figure, compared to the 55-liter Stage IIIB and IV Tier 4i value, suggests a substantially different cooling circuit layout in the Stage IV engine generation.
  • The change interval for Stage IIIB and IV Tier 4i cooling systems is set at 24 months under normal use conditions, with no hourly threshold specified. A time-only interval is common when coolant degradation is considered more dependent on calendar aging than on engine operating hours.
  • Stage IV variants carry a dual-threshold change interval of 1000 hours or 12 months, whichever comes first, under normal use conditions. The addition of an hourly limit alongside a calendar limit reflects a service approach where both operating intensity and elapsed time are treated as independent factors in coolant condition.
  • The shift from a 24-month interval on Stage IIIB and IV Tier 4i variants to a 1000-hour or 12-month interval on Stage IV variants represents a notably shorter calendar period, dropping from two years to one. In high-utilization harvest equipment, the 1000-hour threshold may be reached before the 12-month mark, making the hourly limit the operative trigger in those cases.
  • The TSB designation appears alongside TS across both the C9205 and C9206 lines, with each sharing identical capacity and interval figures within the same emission standard. The B suffix in TSB typically denotes a body or bin configuration variant in combine harvester nomenclature, and the matching coolant specs indicate no difference in the underlying engine cooling system between the two body types.

Other Systems