Deutz-Fahr C 7000

Coolant capacity & service interval

Deutz-Fahr C 7000 uses coolant with a capacity of 17,2 liters. Service intervals occur every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C7205, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C7205 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C7205 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C7206, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C7206 TS, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months
C7206 TSB, Stage IV (2016- )
  • Use: Normal
  • Capacity 17,2 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • All six configurations of the Deutz-Fahr C 7000 listed here share an identical cooling system capacity of 17.2 liters, indicating a uniform cooling circuit design across the C7205 and C7206 variants regardless of trim designation.
  • The TS and TSB suffix designations denote different header or threshing configurations within the C 7000 series, yet the cooling system capacity remains consistent at 17.2 liters across all of them.
  • A 17.2-liter coolant capacity is characteristic of a large-displacement agricultural engine cooling circuit, reflecting the thermal management demands of Stage IV emissions-compliant powertrains, which incorporate additional aftertreatment components that generate heat.
  • Stage IV refers to the European Union's Stage IV non-road mobile machinery emissions standard, which mandates significantly reduced particulate matter and nitrogen oxide output compared to earlier tiers. Meeting this standard typically requires exhaust aftertreatment systems such as diesel particulate filters or selective catalytic reduction units.
  • The specified coolant change interval of 1000 hours or 12 months under normal use conditions follows a dual-trigger structure, meaning whichever threshold is reached first would govern the service event in typical agricultural operation.
  • An interval expressed in operating hours rather than distance is standard practice for agricultural machinery, where annual mileage is not a meaningful measure of engine wear or fluid degradation.
  • The 1000-hour mark is a common major service interval in combine harvester maintenance schedules, often aligning with the end of one or two harvest seasons depending on regional usage intensity.

Other Systems