Deutz-Fahr C 6000

Coolant capacity & service interval

Deutz-Fahr C 6000 requires coolant with a capacity of 55 liters. Service intervals occur every 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C6205, Stage IIIB/Tier 4 (2017- )
  • Use: Normal
  • Capacity 55 liter
  • Change 1000 hours/ 12 months
C6205 TS, Stage IIIB/Tier 4 (2017- )
  • Use: Normal
  • Capacity 55 liter
  • Change 1000 hours/ 12 months
C6205 (2016- )
  • Use: Normal
  • Capacity 55 liter
  • Change 1000 hours/ 12 months
C6205 TS (2016- )
  • Use: Normal
  • Capacity 55 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Deutz-Fahr C 6000 series cooling system holds 55 liters across all four configurations covered — the C6205, C6205 TS, C6205 Stage IIIB/Tier 4, and C6205 TS Stage IIIB/Tier 4. A 55-liter capacity is consistent with large-displacement agricultural machinery where extended thermal management demands a substantial coolant volume.
  • The 55-liter figure represents a full cooling system fill, meaning the total volume required to service the entire circuit, including the engine block, radiator, and associated passages, rather than a partial or top-up quantity.
  • All four configurations share an identical service interval of 1000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger structure means a machine with low annual hours still requires a coolant change at the 12-month mark.
  • The C6205 and C6205 TS configurations carry a starting year of 2016, while the Stage IIIB/Tier 4 variants of both — the C6205 Stage IIIB/Tier 4 and C6205 TS Stage IIIB/Tier 4 — carry a starting year of 2017. Despite the one-year difference in introduction, all four share the same 55-liter capacity and 1000-hour/12-month interval.
  • Stage IIIB and Tier 4 refer to emissions certification standards applied to off-road diesel engines. The presence of emissions hardware in the Stage IIIB/Tier 4 variants does not alter the cooling system capacity or service interval relative to the non-emissions-certified C6205 and C6205 TS configurations.
  • The interval of 1000 hours is a common benchmark in agricultural equipment servicing, reflecting the operational intensity typical of harvest machinery where engines may accumulate hours rapidly during seasonal use.

Other Systems