Deutz-Fahr AgroFarm

Brake fluid capacity & service interval

Deutz-Fahr AgroFarm brake fluid capacity is 1 liter. Service intervals consist of a check every 50 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
AgroFarm 100 G, ->60001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
AgroFarm 100 G, ->50001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
AgroFarm 115 G, ->10001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
AgroFarm 115 G, ->20001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
AgroFarm 85 G, ->50001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
AgroFarm 85 G, ->60001 (2013-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • All six AgroFarm configurations listed — the 85 G, 100 G, and 115 G variants across their respective serial number ranges — share an identical brake fluid system capacity of 1 liter. In agricultural machinery, a 1-liter capacity for a combined hydraulic brake and clutch circuit is consistent with a shared-reservoir design, where a single fluid supply serves both functions through a common hydraulic circuit.
  • The Deutz-Fahr AgroFarm brake fluid specifications apply to a hydraulic brake/clutch system rather than a conventional sealed brake circuit. Hydraulic clutch actuation integrated with the brake fluid supply is a common arrangement in tractor drivetrains, where the clutch pedal operates through the same fluid reservoir as the braking system.
  • The 50-hour check interval applies under normal use conditions across all listed AgroFarm variants. In tractor service schedules, 50-hour intervals are relatively frequent and reflect the demanding operating environments typical of agricultural equipment, where contamination, moisture ingress, and mechanical stress on fluid systems occur more rapidly than in on-road vehicles.
  • The serial number suffixes in the configuration designations — such as "->50001" and "->60001" for the 100 G, and "->10001" and "->20001" for the 115 G — indicate production sequence boundaries. Separate entries for each serial number range suggest that specification applicability is tied to manufacturing batches, even when the fluid capacity and service interval values are identical across those ranges.
  • The 85 G variants follow the same serial number range structure as the 100 G, with entries delineated at the ->50001 and ->60001 boundaries. Both 85 G entries carry the same 1-liter capacity and 50-hour check interval as the larger-displacement models in the AgroFarm lineup for 2013-2018.

Other Systems