Deutz-Fahr AgroFarm C

Coolant capacity & service interval

Deutz-Fahr AgroFarm C coolant capacity is 11 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agrofarm 100 C, ->ZKDT560200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrofarm 75 C, ->70001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrofarm 80 C, ->ZKDT500200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrofarm 85 C, ->70001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrofarm 90 C, ->ZKDT530200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrofarm 95 C, ->70001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • All six Deutz-Fahr AgroFarm C variants covered in the 2014-2018 specifications share an identical cooling system capacity of 11 liters, indicating a uniform engine cooling architecture across the 75 C, 80 C, 85 C, 90 C, 95 C, and 100 C models despite their differing power outputs.
  • The 11-liter figure represents the total cooling system fill volume, which in agricultural tractors typically accounts for the engine block, cylinder head passages, radiator, and connecting hoses rather than a partial service top-up quantity.
  • Coolant level checks are specified at 10-hour intervals under normal use conditions, a frequency consistent with the demanding thermal cycles of agricultural machinery where extended field operation can accelerate coolant loss through minor seepage or evaporation.
  • The coolant change interval is set at 1,200 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means calendar time governs the interval for machines with low annual operating hours, while engine hours govern it for heavily used units.
  • The serial number cutoffs listed for several models, such as ZKDT560200TD10001 for the Agrofarm 100 C and ZKDT530200TD10001 for the Agrofarm 90 C, define the upper production boundary for which these cooling system specifications apply, distinguishing earlier build sequences from any subsequent revisions.
  • The Agrofarm 75 C and 85 C share a serial number ceiling of 70001, as do the 95 C variants, grouping certain models under a common production boundary that differs from the alphanumeric VIN-style cutoffs used for the 80 C, 90 C, and 100 C.

Other Systems