Deutz-Fahr AgroCompact

Manual transmission fluid capacity & service interval

Deutz-Fahr AgroCompact manual transmission fluid capacity is 27 liters. Service intervals include checking every 250 hours and changing every 1000 hours or 12 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
3.30 F (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.30 V (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.50 F (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.50 S (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.50 V (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.70 F (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.70 V (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.90 F (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12
3.90 S (1993-2001)
  • Use: Normal
  • Capacity 27 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: 24/12

Additional Notes

  • All Deutz-Fahr AgroCompact variants covered here share a transaxle-type manual transmission, meaning the gearbox and drive axle are housed in a single integrated unit. A 27-liter fluid capacity reflects this combined design, which requires significantly more fluid volume than a standalone gearbox would.
  • The 27-liter capacity figure applies uniformly across all nine variants — the 3.30 F, 3.30 V, 3.50 F, 3.50 S, 3.50 V, 3.70 F, 3.70 V, 3.90 F, and 3.90 S — spanning the full 1993-2001 production range without variation by model designation or suffix.
  • In agricultural equipment, fluid intervals are expressed in engine hours rather than distance, since tractors and compact utility machines accumulate operating time at variable ground speeds. The 250-hour check interval for the AgroCompact transaxle reflects a periodic inspection point rather than a full fluid replacement.
  • The change interval is defined by two thresholds: 1000 hours of operation or 12 months, whichever comes first. The time-based limit of 12 months accounts for machines that may not accumulate 1000 hours within a calendar year, ensuring fluid degradation from age alone does not go unaddressed.
  • All nine configurations carry a normal use condition designation. In service interval terminology, normal use typically represents standard operating conditions without the accelerated wear factors associated with severe-duty classifications such as extreme loads, high-contamination environments, or frequent short-cycle operation.
  • The suffix letters in each variant name — F, V, and S — denote different configuration types within the AgroCompact range, yet none of these differences produce any variation in transaxle fluid capacity or service intervals across the specifications listed.

Other Systems