Kymco Grand Dink / Grandvista

Coolant capacity & service interval

Kymco Grand Dink / Grandvista uses coolant with a capacity range of min to max. Service intervals occur every 10000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Grand Dink 125 (2007-2011)
  • Use: Normal
  • Between min and max.
  • Change 10000 km
Grand Dink 150 (2007- )
  • Use: Normal
  • Between min and max.
  • Change 10000 km
Grand Dink 250 / Grandvista 250 (2007- )
  • Use: Normal
  • Between min and max.
  • Change 10000 km

Additional Notes

  • The coolant level specification for all three Grand Dink and Grandvista 250 variants calls for a fill between the minimum and maximum marks, which is a standard reservoir-based level check rather than a precise measured volume.
  • The Kymco Grand Dink 125 (2007-2011), Grand Dink 150, and Grand Dink 250 / Grandvista 250 all share an identical coolant change interval of 10,000 km under normal use conditions.
  • The normal use condition tied to the 10,000 km interval applies uniformly across the 125, 150, and 250 displacement variants, with no separate severe-use interval listed for any of them.
  • The Grand Dink 125 carries a 2007-2011 model year span, while the Grand Dink 150 and Grand Dink 250 / Grandvista 250 both carry a starting year of 2007, making the 125 the only variant with a defined production window in these specifications.
  • All three variants are identified under the same system note of "cooling system," indicating the specifications apply to the full cooling circuit rather than a sub-component such as a reservoir only.

Other Systems