Kymco Grand Dink / Grandvista

Brake fluid capacity & service interval

Kymco Grand Dink / Grandvista uses brake fluid with a capacity range between min and max. Service intervals include checks at 1000 km, 1500 km, and 3000 km, with changes at 10000 km/12 months or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Grand Dink 125 (2007-2011)
  • Use: Normal
  • Between min and max.
  • Check 1000 km
  • Change 10000 km/ 12 months
Grand Dink 150 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 1000 km
  • Change 10000 km/ 12 months
Grand Dink 250 / Grandvista 250 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 1000 km
  • Change 10000 km/ 12 months
Grand Dink 50 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 3000 km
  • Change 24 months
Grand Dink 50 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1500 km

Additional Notes

  • Brake fluid capacity across all Grand Dink and Grandvista 250 variants is expressed as a reservoir level range rather than a fixed volume, meaning the fluid must sit between the minimum and maximum marks on the reservoir rather than being filled to a precise measured quantity.
  • The Kymco Grand Dink 125, Grand Dink 150, and Grand Dink 250 / Grandvista 250 share identical service intervals under normal use conditions: a level check every 1,000 km and a full fluid change every 10,000 km or 12 months, whichever comes first.
  • The 12-month time limit on the 10,000 km change interval for the 125, 150, and 250 cc variants reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and degrades regardless of distance traveled.
  • The Grand Dink 50 operates on a notably longer check interval of 3,000 km under normal use, compared to the 1,000 km interval specified for the larger-displacement models.
  • The Grand Dink 50 change interval is defined solely by a 24-month time limit with no accompanying distance figure, unlike the dual time-and-distance criterion applied to the 125, 150, and 250 cc variants.
  • An initial service entry exists specifically for the Grand Dink 50, requiring a brake fluid level check at 1,500 km. No equivalent initial service interval appears in the specifications for the 125, 150, or 250 cc models.
  • All five specification rows carry a hydraulic brake system note, confirming that the fluid level and change intervals apply to hydraulically actuated brake circuits rather than cable-operated mechanical systems.

Other Systems