Kymco Filly

Brake fluid capacity & service interval

Kymco Filly brake fluid capacity is between min and max. Service intervals include check 2000 km, change 24 months, and check 1000 km. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Filly 50 LX (2007- )
  • Use: Normal
  • Between min and max.
  • Check 2000 km
  • Change 24 months
Filly 50 LX (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Kymco Filly 50 LX hydraulic brake system does not specify a fixed fluid volume. Instead, the level is maintained between the minimum and maximum marks on the reservoir, which is the standard method for brake fluid service on systems without a defined fill capacity.
  • Under normal use conditions, the brake fluid level on the Filly 50 LX is checked at 2000 km intervals.
  • A complete brake fluid change is scheduled every 24 months under normal use conditions, regardless of mileage accumulated during that period.
  • An initial service check of the brake fluid level is specified at 1000 km, which is an earlier interval than the 2000 km check that applies under normal ongoing use.
  • The initial service check at 1000 km carries no fluid change interval, only a level inspection, distinguishing it from the normal use schedule that pairs a 2000 km check with a 24-month change cycle.