Citroën Berlingo Van, K9

Brake fluid capacity & service interval

The Citroën Berlingo Van, K9 uses brake fluid with a capacity between min and max. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Berlingo Van 1.2 PureTech 110, HNP (2018- )
  • Use: Normal
  • Between min and max.
Berlingo Van 1.2 PureTech 130, HNS (2018- )
  • Use: Normal
  • Between min and max.

Additional Notes

  • The Citroën Berlingo Van K9 brake fluid specification applies to the hydraulic brake system across both the 1.2 PureTech 110 (HNP) and 1.2 PureTech 130 (HNS) engine variants, each introduced from 2018.
  • Rather than a fixed volume figure, the fill level for both variants is expressed as a range between the minimum and maximum marks on the reservoir, which is standard practice for brake fluid servicing where topping up rather than full replacement is the typical maintenance action.
  • Both the HNP and HNS configurations share the same fill specification format under normal use conditions, indicating no differentiation in brake fluid reservoir capacity between the two PureTech engine outputs in the K9 generation.

Other Systems