Citroën Berlingo Van, K9

Automatic transmission fluid capacity & service interval

Citroën Berlingo Van, K9 automatic transmission fluid capacity ranges from 2,5 to 6 liter. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Berlingo Van 1.2 PureTech 130, HNS (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
Berlingo Van 1.5 BlueHDi 130, YHZ (2018- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The Citroën Berlingo Van K9 1.2 PureTech 130 (HNS) and 1.5 BlueHDi 130 (YHZ), both introduced in 2018, share identical automatic transaxle fluid capacities across their respective configurations.
  • A dry fill capacity of 6 liters applies to both engine variants, representing the total fluid volume required when filling a completely drained or rebuilt transmission from empty.
  • A service fill capacity of 2.5-3.5 liters applies to both variants under normal use conditions, reflecting the smaller volume needed when fluid is changed without a full disassembly, since residual fluid remains in the torque converter and passages.
  • The service fill range of 2.5-3.5 liters is expressed as a span rather than a fixed value, which is typical for automatic transaxles where the exact recovered volume can vary depending on drain time and transmission temperature at the time of service.
  • Both the petrol HNS and diesel YHZ units are classified as transaxle automatics, meaning the transmission and final drive share a common housing and fluid circuit, which is reflected in the unified capacity figures across both powertrains.

Other Systems