Bremach T-Rex

Transfer case fluid capacity & service interval

Bremach T-Rex transfer case fluid capacity is 3 liters. Service intervals include 40000 km or 800 hours and 30000 km or 1200 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T-Rex 3.0 Euro 5 + DPF, F1C (2011- )
  • Use: Normal
  • Capacity 3 liter
  • Change 30000 km/ 1200 hours
T-Rex 2.3 Euro 4, F1A (2010- )
  • Use: Normal
  • Capacity 3 liter
  • Change 40000 km/ 800 hours
T-Rex 3.0 (107 kW) Euro 4 + DPF, F1C (2010-2012)
  • Use: Normal
  • Capacity 3 liter
  • Change 40000 km/ 800 hours
T-Rex 3.0 (130 kW) Euro 4 + DPF, F1C (2010-2012)
  • Use: Normal
  • Capacity 3 liter
  • Change 40000 km/ 800 hours

Additional Notes

  • All four Bremach T-Rex transfer case configurations carry a 3-liter fluid capacity, which is a typical service fill volume for a light-to-medium commercial vehicle transfer box of this class.
  • The 2.3 Euro 4 (F1A) and both 3.0 Euro 4 + DPF (F1C) variants share an identical change interval of 40,000 km or 800 hours under normal use conditions.
  • The dual-unit interval structure — kilometers alongside operating hours — reflects the working nature of the T-Rex platform, where engine hours accumulate independently of road distance in low-speed or stationary power take-off applications.
  • The 3.0 Euro 5 + DPF (F1C) variant, introduced from 2011, carries a notably different change interval of 30,000 km or 1,200 hours compared to the Euro 4 F1C variants, despite sharing the same 3-liter capacity.
  • The hour-based interval for the Euro 5 variant (1,200 hours) is 50% longer than the 800-hour interval on the Euro 4 variants, while the kilometer-based interval is 25% shorter at 30,000 km versus 40,000 km.
  • The two 3.0 Euro 4 + DPF F1C variants differ only in power output — 107 kW and 130 kW — yet both share identical transfer case fluid capacity and change interval specifications.

Other Systems