Bremach T-Rex
Manual transmission fluid capacity & service interval
Bremach T-Rex manual transmission fluid capacity is 3 liters. Service intervals are 40000 km or 800 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| T-Rex 3.0 Euro 5 + DPF, F1C (2011- ) |
|
| T-Rex 2.3 Euro 4, F1A (2010- ) |
|
| T-Rex 3.0 (107 kW) Euro 4 + DPF, F1C (2010-2012) |
|
| T-Rex 3.0 (130 kW) Euro 4 + DPF, F1C (2010-2012) |
|
| T-Rex 3.0 (130 kW) Euro 4 + DPF, F1C (2010-2012) |
|
Additional Notes
- All five configurations of the Bremach T-Rex listed here share a uniform manual transmission fluid capacity of 3 liters, spanning both the 2.3-liter F1A and the 3.0-liter F1C engine families.
- A 3-liter fill is a moderate capacity typical of light commercial manual gearboxes, consistent with a service fill rather than a full overhaul quantity, which would generally require additional fluid to account for residual volume in the torque path and bearing galleries.
- The 3.0 Euro 5 + DPF F1C variant is the only configuration among those listed that carries an explicit change interval, set at 40,000 km or 800 hours under normal use conditions.
- The dual-format interval of 40,000 km or 800 hours on the Euro 5 F1C variant reflects a time-based threshold alongside the distance-based one, a common approach for vehicles that may accumulate engine hours through low-speed or stationary operation faster than road kilometers.
- The T-Rex 3.0 F1C engine appears in two Euro 4 output variants, rated at 107 kW and 130 kW respectively, both covering the 2010-2012 period and both sharing the same 3-liter manual transmission fluid capacity under normal use conditions.
- The 2.3-liter F1A Euro 4 configuration and the 3.0-liter F1C Euro 5 configuration each have a starting year of 2010 and 2011 respectively, with no closing year listed for either, while the three F1C Euro 4 variants are bounded to 2010-2012.