Bremach Job

Coolant capacity & service interval

Bremach Job uses coolant with a capacity of 11 liters. The service interval for the fluid is 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Job X4 + DPF Euro 4 (2008-2010)
  • Use: Normal
  • Capacity 11 liter
  • Change 36 months
Job X4 Euro 4 (2007-2010)
  • Use: Normal
  • Capacity 11 liter
  • Change 36 months

Additional Notes

  • The Bremach Job X4 + DPF Euro 4 and the Job X4 Euro 4 both share an 11-liter cooling system capacity, which reflects a full system fill volume covering the engine block, cylinder head passages, and radiator circuit.
  • An 11-liter coolant capacity is on the higher end for light commercial vehicles, suggesting a relatively large displacement engine with an extended cooling circuit.
  • The DPF-equipped variant spans 2008-2010, while the non-DPF Euro 4 variant spans 2007-2010, meaning the base X4 Euro 4 predates the DPF version by one model year.
  • Both configurations carry a 36-month change interval under normal use conditions, placing the service schedule on a time-based rather than mileage-based cycle.
  • A 36-month coolant change interval is a standard figure for modern ethylene glycol-based coolants, which typically maintain corrosion inhibitor effectiveness for two to three years before degradation becomes a concern.

Other Systems