Bremach Extreme

Manual transmission fluid capacity & service interval

Bremach Extreme manual transmission fluid capacity ranges from 2,8 to 3 liters. Service intervals include checking at 15000 km or 500 hours, and changing at 30000 km or 40000 km or 800 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Extreme 4x4 + DPF Euro 4 (2008-2010)
  • Use: Normal
  • Capacity 3 liter
  • Change 40000 km/ 800 hours
  • Code: ZF 6S-300 6/1
Extreme 4x4 Euro 4 (2007-2010)
  • Use: Normal
  • Capacity 3 liter
  • Change 40000 km/ 800 hours
  • Code: ZF 6S-300 6/1
Extreme 4x4 Euro 3 (2001-2008)
  • Use: all
  • Capacity 2,8 liter
  • Check 15000 km/ 500 hours
  • Change 30000 km
  • Code: Ecolite 6S-300 6/1

Additional Notes

  • The Bremach Extreme 4x4 Euro 3 (2001-2008) carries a manual transmission fluid capacity of 2.8 liters, while both the Euro 4 (2007-2010) and Euro 4 + DPF (2008-2010) variants hold 3 liters, reflecting a 0.2-liter increase between the Euro 3 and Euro 4 generations.
  • The 3-liter capacity on the Euro 4 and Euro 4 + DPF configurations represents a service fill volume, meaning the amount of fluid required when draining and refilling the transmission under normal maintenance conditions rather than a full overhaul rebuild quantity.
  • The Euro 3 variant specifies a fluid check interval of 15,000 km or 500 hours, a separate and shorter interval than the full change interval, indicating a periodic inspection of fluid level and condition is expected between full drain-and-fill services.
  • The Euro 3 configuration's change interval is set at 30,000 km with no hour-based equivalent listed for the change, whereas the check interval carries a dual metric of 15,000 km or 500 hours, showing that the two service actions follow different measurement frameworks.
  • Both the Euro 4 and Euro 4 + DPF variants share an identical change interval of 40,000 km or 800 hours under normal use conditions, which is 10,000 km longer than the Euro 3 change interval of 30,000 km.
  • The Euro 3 row applies to all use conditions rather than specifying normal or severe separately, meaning the 2.8-liter capacity and 30,000 km change interval are not adjusted based on operating environment in the listed specifications.
  • The hour-based interval of 800 hours on the Euro 4 and Euro 4 + DPF variants is relevant for applications where engine runtime is a more practical measure than distance, such as low-speed or stationary work cycles common in utility and off-road vehicle use.

Other Systems