Linde Forklift trucks, diesel (022 series)

Coolant capacity & service interval

Linde Forklift trucks, diesel (022 series) require coolant with a capacity of 50 liter. Service intervals include checking every 10 hours and changing every 2000 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
H180, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H200, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H220, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H236, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H250, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours
H280, Scania DS9 62A (1995- )
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • All six models in the Linde 022 series diesel forklift range covered here share identical cooling system specifications, with a 50-liter capacity across the H180, H200, H220, H236, H250, and H280 variants, each fitted with the Scania DS9 62A engine.
  • A 50-liter coolant capacity is notably large relative to typical automotive applications, reflecting the scale and thermal demands of heavy-duty industrial diesel powerplants used in high-capacity forklift trucks.
  • The Scania DS9 62A is an inline six-cylinder diesel engine originally developed for heavy commercial vehicle use. Its adoption across all six 022 series models accounts for the uniform cooling system volume across the range.
  • The check interval of every 10 operating hours is among the most frequent service checks found in industrial equipment specifications, indicating that coolant level monitoring is treated as a near-daily maintenance task under normal use conditions.
  • The 2000-hour coolant change interval under normal use conditions aligns with standard heavy-duty diesel service cycles, where extended drain periods are supported by the thermal stability of modern industrial coolant formulations.
  • All specifications are designated for normal use conditions, meaning the 10-hour check and 2000-hour change intervals apply to standard operating environments rather than severe-duty or extreme-temperature conditions.

Other Systems