Linde Forklift trucks, diesel (022 series)

Automatic transmission fluid capacity & service interval

Linde Forklift trucks, diesel (022 series) require Automatic transmission fluid with a capacity of 21 liters. Service intervals include checking every 10 hours and changing every 1000 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • H180, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H200, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H220, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H236, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H250, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3
  • H280, Scania DS9 62A (1995- )
  • Powershift
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours
  • Code: 3/3

Additional Notes

  • The Linde Forklift trucks, diesel (022 series) H180, H200, H220, H236, H250, and H280 models all share an identical powershift transmission fluid capacity of 21 liters, indicating a uniform transmission unit across the entire model range when paired with the Scania DS9 62A engine.
  • A 21-liter fluid capacity is a relatively large fill volume, consistent with heavy-duty powershift transmissions designed for high-load industrial applications such as large-capacity forklift operations.
  • Powershift transmissions use hydraulic pressure to engage gear clutches without interrupting power flow, which places continuous thermal and mechanical demands on the fluid, making both check frequency and change intervals operationally significant.
  • The fluid check interval is set at every 10 operating hours under normal use conditions, a very short interval that reflects the critical role transmission fluid condition plays in powershift clutch performance and cooling.
  • The fluid change interval is specified at 1000 operating hours under normal use conditions, a figure calibrated to industrial equipment that may accumulate hours far more rapidly than on-road vehicles.
  • All six model variants from the H180 through the H280 carry identical check and change intervals of 10 hours and 1000 hours respectively, with no variation in service scheduling across the model range despite differences in model designation.
  • The specifications apply from 1995 onward for all six Scania DS9 62A-equipped variants, meaning the same fluid capacity and service intervals have been in place since the introduction year across the full lineup.

Other Systems