Case Telescopic handlers, TX

Coolant capacity & service interval

Case Telescopic handlers, TX models require Coolant with a capacity of 24 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TX130-33, FPT F4GE9484F (Tier 3) (2007-2016)
  • Use: Normal
  • Capacity 24 liter
TX130-40, FPT F4GE9484J (Tier 3) (2007-2016)
  • Use: Normal
  • Capacity 24 liter
TX130-45, FPT F4GE9484J (Tier 3) (2007-2016)
  • Use: Normal
  • Capacity 24 liter
TX140-45, FPT F4GE9484J (Tier 3) (2007-2016)
  • Use: Normal
  • Capacity 24 liter
TX170-45, FPT F4GE9484J (Tier 3) (2007-2016)
  • Use: Normal
  • Capacity 24 liter

Additional Notes

  • The Case TX series telescopic handlers covered in these specifications span the 2007-2016 model years and are all equipped with FPT Tier 3 engines, either the F4GE9484F or the F4GE9484J variant.
  • Every configuration listed carries a cooling system capacity of 24 liters, which is a figure representing the total system fill volume including the engine block, cylinder head passages, radiator, and associated hoses.
  • The TX130-33 is the only model in the lineup paired with the FPT F4GE9484F engine, while the TX130-40, TX130-45, TX140-45, and TX170-45 all use the FPT F4GE9484J engine, yet all five share the same 24-liter cooling system capacity.
  • A 24-liter cooling system capacity is relatively substantial for a telescopic handler application, reflecting the thermal management demands placed on Tier 3 diesel engines operating under load-intensive lifting and positioning cycles.
  • All five configurations carry a normal use condition designation for the cooling system, meaning the 24-liter capacity figure applies to standard operating environments rather than severe-duty or first-fill scenarios.

Other Systems