Case Telescopic handlers, TX
Brake fluid capacity & service interval
Case Telescopic handlers, TX models require 1 liter of Brake fluid. Service intervals include Normal use. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TX130-33, FPT F4GE9484F (Tier 3) (2007-2016) |
|
| TX130-40, FPT F4GE9484J (Tier 3) (2007-2016) |
|
| TX130-45, FPT F4GE9484J (Tier 3) (2007-2016) |
|
| TX140-45, FPT F4GE9484J (Tier 3) (2007-2016) |
|
| TX170-45, FPT F4GE9484J (Tier 3) (2007-2016) |
|
Additional Notes
- The Case TX Telescopic Handlers covered in these specifications span the 2007-2016 model years and are all equipped with FPT Tier 3 engines, with the F4GE9484F appearing in the TX130-33 and the F4GE9484J shared across the TX130-40, TX130-45, TX140-45, and TX170-45 configurations.
- Each configuration across the entire TX lineup carries a hydraulic brake system capacity of 1 liter, a figure that applies uniformly regardless of the differences in model designation or engine variant.
- A 1-liter brake fluid capacity is a relatively modest volume, consistent with a dedicated hydraulic brake circuit rather than a combined or integrated hydraulic system reservoir, indicating a discrete brake fluid circuit in each of these machines.
- All five configurations list normal use conditions against the 1-liter capacity figure, meaning the specification applies to standard operating environments without adjustment for severe-duty cycles or extended service intervals.
- The identical 1-liter capacity across models ranging from the TX130-33 through to the TX170-45 suggests the hydraulic brake circuit design remained consistent across the TX series despite the variation in lift capacity and overall machine size reflected in the model numbering.