Bobcat Utility vehicles

Differential fluid capacity & service interval

Bobcat Utility vehicles require differential fluid with a capacity range of 0,15 to 0,6 liters. Service intervals include checks at 1 month and changes at 12 months or 50, 100, or 300 hours. The data covers 14 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 2200D, Kubota D722
  • Front
  • Use: Normal
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 100 hours
  • 2200D, Kubota D722
  • Front
  • Use: Initial service
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 2200D, Kubota D722
  • Rear
  • Use: Normal
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 300 hours
  • 2200D, Kubota D722
  • Rear
  • Use: Initial service
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 2200S, Kubota D722
  • Front
  • Use: Normal
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 100 hours
  • 2200S, Kubota D722
  • Front
  • Use: Initial service
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 2200S, Kubota D722
  • Rear
  • Use: Normal
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 300 hours
  • 2200S, Kubota D722
  • Rear
  • Use: Initial service
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 2300, Kubota D722
  • Front
  • Use: Normal
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 100 hours
  • 2300, Kubota D722
  • Front
  • Use: Initial service
  • Capacity 0,15 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 2300, Kubota D722
  • Rear
  • Use: Normal
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 300 hours
  • 2300, Kubota D722
  • Rear
  • Use: Initial service
  • Capacity 0,6 liter
  • Check 1 months
  • Change 12 months/ 50 hours
  • 3400D, Yanmar 3TNM72-APL
  • Front
  • Use: Normal
  • Capacity 0,2 liter
  • 3400D, Yanmar 3TNM72-APL
  • Rear
  • Use: Normal
  • Capacity 0,3 liter

Additional Notes

  • The Bobcat 2200D, 2200S, and 2300 utility vehicles, all equipped with the Kubota D722 engine, share identical front differential capacity of 0.15 liter and rear differential capacity of 0.6 liter, meaning the differential sizing is consistent across all three Kubota-powered configurations.
  • The rear differential holds four times more fluid than the front differential on the Kubota D722-powered models, with 0.6 liter versus 0.15 liter, which reflects the greater mechanical load typically carried by a rear differential in a utility vehicle drivetrain.
  • On the 3400D with the Yanmar 3TNM72-APL engine, the front differential capacity is 0.2 liter and the rear differential capacity is 0.3 liter, both of which differ from the corresponding values on the Kubota D722-powered models.
  • Under normal use conditions on the Kubota D722-powered models, the front differential fluid change interval is set at 12 months or 100 hours, whichever comes first, while the rear differential extends to 12 months or 300 hours.
  • The initial service change interval for both the front and rear differentials on the Kubota D722-powered models is 12 months or 50 hours, which is shorter than the normal-use intervals and reflects the common practice of removing break-in contaminants from new or freshly serviced components early in service life.
  • Regardless of whether the service applies to the front or rear differential, the check interval on the Kubota D722-powered models is set at 1 month across all use conditions, indicating a uniform inspection frequency independent of differential position or service stage.
  • The initial service rear differential interval of 50 hours on the Kubota D722-powered models is six times shorter than the normal-use interval of 300 hours, representing the largest proportional difference between initial and normal service intervals across all differential positions in these specifications.

Other Systems