Bobcat Utility vehicles

Brake fluid capacity & service interval

Bobcat Utility vehicles require Brake fluid with a capacity range of 0,25 to 0,33 liters. Service intervals consist of a check every 6 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2200D, Kubota D722
  • Use: Normal
  • Capacity 0,25 liter
  • Check 6 months
2200S, Kubota D722
  • Use: Normal
  • Capacity 0,25 liter
  • Check 6 months
2300, Kubota D722
  • Use: Normal
  • Capacity 0,25 liter
  • Check 6 months
3400D, Yanmar 3TNM72-APL
  • Use: Normal
  • Capacity 0,33 liter

Additional Notes

  • The 2200D, 2200S, and 2300 models, all equipped with the Kubota D722 engine, share an identical hydraulic brake system capacity of 0.25 liter.
  • The Bobcat 3400D with the Yanmar 3TNM72-APL engine carries a hydraulic brake system capacity of 0.33 liter, which is notably higher than the 0.25 liter figure seen in the Kubota D722-powered models.
  • A capacity value in the range of 0.25 to 0.33 liter is consistent with a compact hydraulic brake reservoir, typical of utility vehicles where the braking circuit is relatively small in volume.
  • The 2200D, 2200S, and 2300 specifications include a six-month check interval for the hydraulic brake system under normal use conditions, meaning the fluid level and condition are to be inspected on that cycle rather than necessarily replaced.
  • No check interval is listed in the 3400D specifications, whereas the three Kubota D722-powered models each carry the six-month check interval under normal use conditions.

Other Systems